BIG WET . . Specimen Label
A CONCENTRATED WETTING AGENT
Ingredients
Active Ingredients: A blend of anionic and nonionic wetting agents: .30%
Inert Ingredients: components ineffective as adjuvant ... 70%
Total: .. ......... .100%
CAUTION
Do not take internally. Avoid skin contact. May cause skin and eye irritation.
Keep out of the reach of children.
ANTIDOTE
If swallowed: Do not induce vomiting. Get medical attention. In case of skin
contact, flush thoroughly with water.
CHARACTERISTICS
Big Wet is a blend of anionic and nonionic wetting agents, highly effective in
reducing surface tension of soils and permits the effective penetration of water
and pesticides into the soil. Big Wet is biodegradable, non-corrosive, rust-inhibiting, and has no flash point. Ingredients in Big Wet are exempt from the requirements of tolerance under Title 40, CFR, 180.1001 (d).
DIRECTIONS FOR USE
Emergent weed control: 1/2 to 1 pint per 100 gallons
Pre-plant and pre emergent: 1/2 pint per 100 gallons
With fungicides: 1 pint per 100 gallons
Liquid fertilizer: 1 to 2 pints per 100 gallons
Aquatic/surface: 1 pint to 1 quarts per 100 gallons
Aquatic/submerged: 1 pint to 1 quart per 100 gallons
Add Big Wet last to solution
CONDITIONS FOR SALE
We warrant that this product conforms to the chemical description on the label
and is reasonably fit for the purposes set forth on the label when used according
to directions under normal use conditions. There are no other warranties, whether expressed or implied, including a warranty of fitness for a particular purpose. This warranty does not extend to the handling or use of this product contrary to label instructions or under abnormal conditions not reasonably foreseeable to seller, and buyer assumes all risk of any such use.
Brewer International
| e-mail:info@brewerint.comP.O. Box 690037
| Vero Beach, Florida 32969-0037(772) 562-0555
| 1-800-228-1833 | FAX (772) 778-2490