Additive 80……... Specimen Label

Spreader Sticker- Buffer

Ingredients

Active Ingredients: nonionic surfactant, polymer, and buffer…………………..……….….80%

Inert Ingredients: components ineffective as adjuvant……………….………………………20%

Total:…………………………………..……………………………........……………………….100%

CAUTION

Do not take internally. Avoid skin contact. May cause skin and eye irritation.

Keep out of the reach of children.

ANTIDOTE

If swallowed: Do not induce vomiting. Get medical attention. In case of skin

contact, flush thoroughly with water.

CHARACTERISTICS

Brewer Additive 80 is an excellent all purpose surfactant that combines wetting with sticking on leaf surface. Product is amber in color with a high flash point. Surfactants in BREWER Additive 80 are exempt from the requirements of tolerance under Title 40, CFR, 180.

DIRECTIONS FOR USE

Herbicides: 1/2 to 2 pints per 100 gallons

Insecticides: ½ to 1 pint per 100 gallons

Fungicides, liquid nutritionals 1 pint per 100 gallons

Dry nutritionals: ½ to 2 pints per 100 gallons

CONDITIONS FOR SALE

We warrant that this product conforms to the chemical description on the label

and is reasonably fit for the purposes set forth on the label when used according

to directions under normal use conditions.

There are no other warranties, whether expressed or implied, including a warranty

of fitness for a particular purpose. This warranty does not extend to the handling or use of this product contrary to label instructions or under abnormal conditions not reasonably foreseeable to seller, and buyer assumes all risk of any such use.

Brewer International | e-mail:info@brewerint.com

P.O. Box 690037 | Vero Beach, Florida 32969-0037

(772) 562-0555 | 1-800-228-1833 | FAX (772) 778-2490